| CODE | TITLE | OUTPUT |
|---|---|---|
| TTSME25001 |
Composite poppet valve design and implementation for automotive engine |
|
| TTSME25002 |
Pneumatic trolley design and Analysis for industrial
applications |
|
| TTSME25003 |
Finite element Analysis of connecting rod with different materials |
|
| TTSME25004 |
Analysis and design of Mathematical and computational
methodology for steering and suspension system |
|
| TTSME25005 |
CFD aerodynamic Analysis of an aircraft wing |
|
| TTSME25006 |
Design, modelling, and Analysis of a flight vehicle's 3-stage
epicyclic planetary reduction gear unit |
|
| TTSME25007 |
Experimental investigation of HSS drill bit coating |
|
| TTSME25008 |
FEA and CFD Analysis for mixed flow impeller |
|
| TTSME25009 |
Design and Simulation of high speed impact of pipes in different
materials |
|
| TTSME25010 |
Ansys FEA and comparative Analysis of a disc brake |
|
| TTSME25011 |
FEA Analysis for cam shaft materials comparison with automotive
applications |
|
| TTSME25012 |
Design and Analysis of composite spur gear |
|
| TTSME25013 |
Design and Analysis of scissor jack |
|
| TTSME25014 |
Design and analysis of Ball dropping test on a plate |
|
| TTSME25015 |
Implementation of Composite in rocker arm for FEA Analysis |
|
| TTSME25016 |
Finite element Analysis for normal and vented disc brake rotor |
|
| TTSME25017 |
Design and Analysis of composite over bridge coupling |
|
| TTSME25018 |
Finite element Analysis (FEA) and comparative Analysis of engine
brackets made of magnesium, Aluminium and cast iron |
|
| TTSME25019 |
Finite element Analysis for helical coil compression spring three
wheeler automotive front suspension |
|
| TTSME25020 |
Fatigue Analysis for Ansys car wheel cornering |
|
| TTSME25021 |
Piston optimization and FEA Analysis with different materials |
|
| TTSME25022 |
Design and Analysis of automotive chassis |
|
| TTSME25023 |
Design and analysis of Bullet penetration test on a plate |
|
| TTSME250233 |
Experimental Investigation and Fabrication of Brake Pad using Natural Composite Material |
|
| TTSME25024 |
Investigating GFRP composite materials by using Thermal
Analysis |
|
| TTSME25025 |
Finite element Analysis of a bicycle frame |
|
| TTSME25026 |
Coil spring design and Analysis with different materials for automotive applications |
|
| TTSME25027 |
Thermal Analysis of a cylinder head gasket |
|
| TTSME25028 |
Finite element method on steady-state thermal stress Analysis of
gearbox casing |
|
| TTSME25029 |
A thin and thick-walled pressure vessel Analysis with different
materials |
|
| TTSME25030 |
Analysis of Nano fluids' effect in a modified vacuum single basin
solar still |
|
| TTSME25031 |
Design and Analysis of jet wind turbine blades |
|
| TTSME25032 |
Design and simulation of cylinder impact on plate |
|
| TTSME25033 |
Composite material study and Analysis of aircraft fuselage body
structure |
|
| TTSME25034 |
Design and Analysis of machine tool spindle |
|
| TTSME25035 |
Design and Analysis of domestic windmill blades |
|
| TTSME25036 |
Numerical simulation for shell and heat exchanger header uniform
distribution among tubes |
|
| TTSME25037 |
Investigation of Stress Analysis for gear wheel transmission |
|
| TTSME25038 |
Experimenting Structural and thermal Analysis for vented and
normal disc brake rotor |
|
| TTSME25039 |
Technological study of micro wind turbines |
|
| TTSME25040 |
Experimental techniques for improving the heat transfer |
|
| TTSME25041 |
Design and analysis of Bottle drop test on a plate |
|
| TTSME25042 |
Design and Thermal Analysis of heat pipe and applications |
|
| TTSME25043 |
Experimenting Steam condensation research in the mini channel heat exchanger |
|
| TTSME25044 |
Design and Analysis of Heat transfer using fin extensions |
|
| TTSME25045 |
Investigation of radial three-cylinder engine by using Static and thermal Analysis |
|
| TTSME25046 |
Transfer method of technology for the Indian wind power sector |
|
| TTSME25047 |
Design and Explicit Dynamics analysis of Reinforced Concrete Beam |
|
| TTSME25048 |
Thermal Analysis on Sheet metal during ultrasonic welding |
|
| TTSME25049 |
Study of Thermal Analysis of steam turbine |
|
| TTSME25050 |
FEA and Analysis of heat transfer through fins with different types of notches |
|
| TTSME25051 |
Finite element Analysis of a composite bus body structure |
|
| TTSME25052 |
Design and validation of pressure compensated flow control valve with bypass check valve for oil hydraulic application |
|
| TTSME25053 |
Design and Analysis of Ashok Leyland (2214) chassis under 25-ton loading condition |
|
| TTSME25054 |
Bending stress and fatigue Analysis of Mahindra tractor connecting rod using finite element method Ansys |
|
| TTSME25055 |
Design and Analysis of mechanical deformation in connecting rod |
|
| TTSME25056 |
Design and Crash Impact analysis of Car body |
|
| TTSME25057 |
Structural Analysis and shape optimization of leaf spring to be used in 16 Ton truck |
|
| TTSME25058 |
Conducting of Oil pumping Analysis in a reciprocating compressor |
|
| TTSME25059 |
Experimental investigation of optimizing single-point tool wear using cryogenic technique with EN8 steel results |
|
| TTSME25060 |
Applying FEA Analysis and weight reduction techniques to bell crank: a topology optimization investigation |
|
| TTSME25061 |
Modelling and bending Analysis of automotive crankshaft model |
|
| TTSME25062 |
Advanced method for making sheet metal oval punching holes |
|
| TTSME25063 |
Ansys-based crankshaft design and Analysis of forged steel and metal matrix composite materials |
|
| TTSME25064 |
Design and simulation of Tyre impact on speed breaker |
|
| TTSME25065 |
Design and Analysis of an air engine piston with the aid of a computer |
|
| TTSME25066 |
Design and comparative Analysis of automotive cooling system and its thermal distribution |
|
| TTSME25067 |
Modelling and Analysis of heat distribution in compressor fins |
|
| TTSME25068 |
Investigation of leaf spring design & Analysis and implementation of composite materials |
|
| TTSME25069 |
Study of Braking system design and FEA Analysis |
|
| TTSME25070 |
Design and Simulation Analysis of Rack and pinion |
|
| TTSME25071 |
Experimenting New model wheel rim design and Analysis for a four-wheeler |
|
| TTSME25072 |
Investigation of impact Analysis of composite material on front sub-frame system |
|
| TTSME25073 |
FEA Analysis performance and comparison between bonded, riveted, and hybrid joints |
|
| TTSME25074 |
Rear axle housing static and model Analysis |
|
| TTSME25075 |
Design and optimization of multi-speed gearbox |
|
| TTSME25076 |
Design and Simulation of orthogonal tool cutting process through
explicit dynamics |
|
| TTSME25077 |
Design and Analysis of a wind turbine with thin Air foil blades |
|
| TTSME25078 |
Finite element Analysis of stress in helical gear |
|
| TTSME25079 |
Modelling and simulation of a supra sae car's steering box |
|
| TTSME25080 |
Angle cutting die design and Analysis to achieve exact geometry at cutting face |
|
| TTSME25081 |
Study of FRP composite pressure vessel design and FEA Analysis |
|
| TTSME25082 |
Simulation of Tensile test of materials through explicit dynamics analysis |
|
| TTSME25083 |
Vibration Analysis of FEA for fault diagnosis in gear |
|
| TTSME25084 |
FEA - Analytical and investigational study of ceramic coating on engine valve using plasma spray technique |
|
| TTSME25085 |
Cutting parameter Analysis and optimization in ND-YAG laser cutting of C45 steel sheet |
|
| TTSME25086 |
Design and Simulation of Can crushing using explicit dynamics |
|
| TTSME25087 |
Investigation of Ceramic coating on steel pipe of cladding process for nuclear power plant using FEA Analysis |
|
| TTSME25088 |
Metallurgical experiments with pulsed ND: YAG laser welding on
austenite steel sheets-ss316 |
|
| TTSME25089 |
Ansys FEA Analysis an comparative investigation of ceramic
coating on aluminium piston |
|
| TTSME25090 |
Analysis and Optimization of car seat frame to increase the safety
measures |
|
| TTSME25091 |
Design and simulation of Ball penetrating through multiple
plates |
|
| TTSME25092 |
Structural Analysis of cranial to identify its structural
behaviour |
|
| TTSME25093 |
Design optimization and thermal Analysis of two wheeler
engine fins |
|
| TTSME25094 |
Design and Analysis of engine mount to study the variations in
vibration |
|
| TTSME25095 |
Design and analysis of Drill bit operation through explicit Dynamics |
|
| TTSME25096 |
Design and Analysis of gripper to study the thermal behaviour |
|
| TTSME25097 |
Design and Analysis of laptop cooler pad with phase change material |
|
| TTSME25098 |
Design and structural Analysis of pipe with different interior
coatings |
|
| TTSME25099 |
Design and Crash test simulation of car bumper through explicit
dynamics |
|
| TTSME25100 |
CFD Analysis Economizer in a tangential fired boiler |
|
| TTSME25101 |
Study of Aerodynamics and stability of the 14-bis aircraft using CFD |
|
| TTSME25102 |
Analysis of gas flow behaviour in various economizers using CFD |
|
| TTSME25103 |
Study of Fluid flow and temperature distribution in automobile
radiators |
|
| TTSME25104 |
Investigation of Air flow Analysis of a cyclone dust collector |
|
| TTSME25105 |
Ansys /CFD comparative and FEA Analysis of shell and tube heat
exchangers using fins |
|
| TTSME25106 |
CFD Analysis of ceramic monolith heat exchanger |
|
| TTSME25107 |
Water flow Analysis for laminar and turbulent flow in a conventional water tap |
|
| TTSME25108 |
Performing CFD Analysis to study the aerodynamic movements of a
car model |
|
| TTSME25109 |
Experimenting the Computational fluid dynamics Analysis for rocket nozzle |
|
| TTSME25110 |
CFD Analysis of a scramjet engine's supersonic exhaust |
|
| TTSME25111 |
Study of Bus/car vehicle aerodynamic design |
|
| TTSME25112 |
Ansys CFD Analysis of thermal coupled and exhaust manifold
performance |
|
| TTSME25113 |
Analyzing performance of centrifugal fan using CFD simulation |
|
| TTSME25114 |
Investigating Intake manifold using CFD Analysis in SI engines |
|
| TTSME25115 |
CFD Analysis of catalytic converter design in a diesel engine |
|
| TTSME25116 |
CFD fluid flow and heat transfer Analysis in a single tube-fin arrangement of an automotive radiator |
|
| TTSME25117 |
CFD Analysis of darrieus vertical axis wind turbine dynamics |
|
| TTSME25118 |
CFD Analysis of a flow-through venture meter to determine the
discharge coefficient |
|
| TTSME25119 |
Computational fluid dynamics Analysis methods of convective
drying for mangoes |
|
| TTSME25120 |
Turbulent flow simulation for draft tube of Kaplan turbine |
|
| TTSME25121 |
Computational fluid flow simulation of propeller for maritime
applications |
|
| TTSME25122 |
Design and Analyze a globe valve as a control valve by using
CFD |
|
| TTSME25123 |
Investigation of Fuel tank sloshing using CFD Analysis |
|
| TTSME25124 |
Analysis of conjugate heat transfer in electronic devices |
|
| TTSME25125 |
CFD Analysis of gas flow inside a hot isostatic press vessel |
|
| TTSME25126 |
Advanced tail wing design for improved performance |
|
| TTSME25127 |
Interactions of air and fuel flow in the combustion chamber for
various injector locations |
|
| TTSME25128 |
An investigation study and drag reduction in a buggy car |
|
| TTSME25129 |
Development of Nozzle to ensure for turbojet engine noise reduction |
|
| TTSME25130 |
Automotive cabin cooling design and optimization |
|
| TTSME25131 |
Design of an electric car battery cooling system using CFD |
|
| TTSME25132 |
CFD Analysis of multiphase flow in open channel flows |
|
| TTSME25133 |
CFD Analysis simulated for diffuser |
|
| TTSME25134 |
CFD Analysis simulated for engine valve |
|
| TTSME25135 |
CFD Analysis for turbulence models |
|
| TTSME25136 |
CFD Analysis of a simple convergent flow |
|
| TTSME25137 |
Natural convective boiling fluid and thermal behaviour at a submerged heated surface |
|
| TTSME25138 |
Thermal simulation for greenhouse effect |
|
| TTSME25139 |
Analyzing ship hull condition by using CFD Analysis |
|
| TTSME25140 |
Orf load prediction on marine structures using CFD |
|
| TTSME25141 |
Study of discrete vortex method using CFD. |
|
| TTSME25142 |
Study of flow through gutters and downspouts |
|
| TTSME25143 |
Study of flowing through sparse bodies |
|
| TTSME25144 |
Ground aerodynamic design study |
|
| TTSME25145 |
Design and Analysis of a back swept blading radial turbine |
|
| TTSME25146 |
Thermal performance of microchannel heat sinks Analysis and
optimization |
|
| TTSME25147 |
Analyzing navier-stokes equations numerical solution for separating
and reattaching flow over a double step expansion and contraction |
|
| TTSME25148 |
Turbulence model comparison in separated-attached diffuser flow |
|
| TTSME25149 |
Simulation study using a stenosis to simulate blood flow in the aorta |
|
| TTSME25150 |
Control of flow through airfoils by the use of dimples of varying
shapes |
|
| TTSME25151 |
Experimental investigation and analysis of the flow field through the
blunt fin with the dimples |
|
| TTSME25152 |
The dimpled surface of a spherical has certain aerodynamic
characteristics and flow patterns. |
|
| TTSME25153 |
The hang-glider that was designed by Angelo Darrigo was given several winglets in order to increase its turning and soaring
capabilities. |
|
| TTSME25154 |
A numerical analysis of the effectiveness of wing boundary layer
management in reducing wingtip shed vortices |
|
| TTSME25155 |
Simulation of aircraft flight using numerical flow data |
|
| TTSME25156 |
An investigation into the enhancement of the top surfaces of airfoil
sections using various flow visualisation methods |
|
| TTSME25157 |
Research into a high-performance co-flow jet airfoil, both experimental and computational in nature |
|
| TTSME25158 |
Modelling of aerodynamic zero-lift drag and its application in adapt |
|
| TTSME25159 |
Using overset meshing, a CFD study was performed on the main
rotor blade of a scale model helicopter. |
|
| TTSME25160 |
Research on the effectiveness of various airfoils used to the outer
parts of big rotor blades |
|
| TTSME25161 |
An examination of the behaviour of foils and wings when the Reynolds number is low |
|
| TTSME25162 |
A computational investigation of the flying aerodynamic system,
focusing on the flap. |
|
| TTSME25163 |
Analysis of the aeroelastic behaviour of aircraft complete with control surfaces using CFD |
|
| TTSME25164 |
Effect that winglets have on a jet transport wing of the first generation |
|
| TTSME25165 |
An investigation of the effects of aerodynamic drag on the deployment of multiple winglets on light aircraft |
|
| TTSME25166 |
Comparison of the aerodynamic performance of an aeroplane wing model with and without a winglet resembling bird feathers |
|
| TTSME25167 |
An investigation on the aircraft configuration known as blended wings and bodies. |
|
| TTSME25168 |
Eliminating excess air resistance with an aircraft model by using an elliptical winglet |
|
| TTSME25169 |
An inquiry of the effects of using several winglets via experimentation |
|
| TTSME25170 |
Analysis of the aerodynamic effects of many winglets on slow-moving aircraft |
|
| TTSME25171 |
An investigation on the effects of contemporary spiroid winglets on the aerodynamic performance of a swept-wing model was carried out. |
|
| TTSME25172 |
Analytical and experimental research of the aerodynamics of wingtip sails using three different types of winglets |
|
| TTSME25173 |
Analysis of the flying characteristics of a wing having numerous
winglets |
|
| TTSME25174 |
Analysis of winglets using CFD at low subsonic flow conditions |
|
| TTSME25175 |
The development of winglets for aeroplanes travelling at low speeds |
|
| TTSME25176 |
An Effect and Performance Characteristics of Intake Air Temperature in CI Engine |
|
| TTSME25177 |
Comparison of Performance Cryogenic Treated and Untreated Carbide Inserts in Turning on AL& AL2 O3 Metal Matrix Composites |
|
| TTSME25178 |
Effect and Experimental Investigation of Nano Fluid based
Solar Water Heater |
|
| TTSME25179 |
Efficient Method of Producing Oval Punching Holes on Sheet Metal With FEA Result |
|
| TTSME25180 |
Effect of Thermo Mechanical Analysis of GMAW by using SA 387(Grade 12) Pressure Vessel Material |
|
| TTSME25181 |
Comparative Performance Evaluation of PVD Coated and CVD Coated Inserts In CNC Turning of EN8 And EN47 |
|
| TTSME25182 |
Experimental Investigation and Thermal Analysis of Battered Region of EDM Machining on OHNS Die Steel |
|
| TTSME25183 |
Design and stress analysis of oval punching holes on sheet metal |
|
| TTSME25184 |
Comparative and Experimental Investigation of Aluminium-Boron Carbide Composites with Different Composition |
|
| TTSME25185 |
Estimation of Circularity, Cylindricity and Surface Roughness in Drilling on Forged Plate of Al 2024-Al2o3&Flyash Metal Matrix Composite |
|
| TTSME25186 |
Evaluation of Machining Behaviours of Aluminium Metal Matrix Composite
(AL+SIC+ZN) |
|
| TTSME25187 |
Experimental Investigation in TIG Welding Parameter to Increase the Tensile Strength |
|
| TTSME25188 |
Experimental and FEA of Angle Cutting Die to Attain Exact Geometry at Cutting Face |
|
| TTSME25189 |
Experimental Investigation of Fibre Orientation in Glass Fibre Reinforced Thermoplastic Composites |
|
| TTSME25190 |
Experimental Investigation and Engine Performance Characteristics of a Diesel Engine by Mahua Biodiesel |
|
| TTSME25191 |
Experimental Investigation of the Properties and Wear Resistance of the Cr-N PVD Coatings |
|
| TTSME25192 |
Experimental Investigation of the Properties and Wear Resistance of the Cr- N PVD Coatings for Tool Steel |
|
| TTSME25193 |
The Investigation and Development of Transformed Layer Thickness by Friction Under Lubrication by Reflective Transmission Spectroscopy |
|
| TTSME25194 |
Experiment Investigation to Increase the Mechanical Characterization of Aluminum with Silicon Carbide Composite |
|
| TTSME25195 |
Experimental Investigation and Synthesis of FE3O4/AU Composite Nanoparticles and Evaluation of their Properties |
|
| TTSME25196 |
Experimental and Optimization of Machining Parameters in EDM of CFRP |
|
| TTSME25197 |
Composite using Taguchi Technique |
|
| TTSME25198 |
An Experimental Investigation of Multi- Layered Ceramic Coating on Piston |
|
| TTSME25199 |
An Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI 304 Austenitic Stainless Steel using M42 Cobalt Drill Bits |
|
| TTSME25200 |
An Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI 316 Austenitic Stainless Steel using M42 Cobalt Drill Bits |
|
| TTSME25201 |
An Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI 410 Austenitic Stainless Steel using M42 Cobalt Twist Drills |
|
| TTSME25202 |
An Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI 316 Austenitic Stainless Steel using Different Twist Drills |
|
| TTSME25203 |
An Experimental Investigation and Implementation of Carbon Fibre With Banana for Brake Lining Application |
|
| TTSME25204 |
Thermo Mechanical Analysis of Dissimilar Joints with EN24 and SS 409 Stainless Steel by using FCAW |
|
| TTSME25205 |
Comparative performance evaluation of PVD coated and CVD coated inserts in CNC turning of EN8 & EN47 |
|
| TTSME25206 |
Analysis and Investigation of Generated During Pyrolysis of Waste Plastics and its Steam Cracking |
|
| TTSME25207 |
An Experimental Investigation for Material Removal Rate in EDM using Tool of Graphite, Copper |
|
| TTSME25208 |
Elastic Analysis of TUBE-FIN Structures Subjected to Combined Bending and Compression |
|
| TTSME25209 |
An Experimental Investigation of Surface Modification in Stainless Steel by Aluminium Powder using Thermal Spray Technique |
|
| TTSME25210 |
Experimental Analysis and Optimization of Electrical Discharge Machining on Inconel 600 with FEA |
|
| TTSME25211 |
An Investigation and Proposal of a Solution for Unit Processing Time Job Shop Scheduling Problem |
|
| TTSME25212 |
An Experimental Investigation of Mechanical Properties of Glass Fibre with Prosopis Julifora as Natural Fiber Reinforced Polymer Composites |
|
| TTSME25213 |
An Investigation and Optimization of CFRP by using End Milling with Taguchi Technique |
|
| TTSME25214 |
An Investigation of Ash Particle Formation During Combustion of a Simulated Coal |
|
| TTSME25215 |
Analysis and Curvature Optimal Corner Smoothing Algorithm for Three and Five
Axes Trajectory Generation |
|
| TTSME25216 |
Analysis and Experimental Investigation of Gasification Behaviours of Woody
Biomass in a Packed Red Reactor |
|
| TTSME25217 |
Analysis and Experimental Suppression of Vibration in Cutting Machine |
|
| TTSME25218 |
Analysis of Anodic Oxide Porous Alumina Templates and Development of Nanowire Surface Fasteners |
|
| TTSME25219 |
Analysis of Characterization and Effects of Fiber Pull Outs in Hole Quality of Carbon Fiber Reinforced Plastics Composite |
|
| TTSME25220 |
Analysis and Experimental Investigations of Weld Characteristics for a TIG Welding with SS 304L and 410 |
|
| TTSME25221 |
Analysis on Fabrication of Anodic Oxide Porous Alumina Templates and Development of Nanowire Surface Fasteners |
|
| TTSME25222 |
Analysis of Oxy-Fuel Combustion Behaviours of Coal in a Fluidized Bed |
|
| TTSME25223 |
Analysis on Non Destructive Evaluation of Thermal Fatigue Cracks on Metal Surface |
|
| TTSME25224 |
Analysis and Effect of Swirl Flow on Combustion Field in Cyclone Jet Combustor |
|
| TTSME25225 |
Analysis of Geometrical Effects of Carbon Fiber Reinforced Plastics Composite with Various Coated Drill Bits |
|
| TTSME25226 |
An Experimental Investigation of Mechanical Properties of Jute Fibre with ABS and Prosposis Julifora as Natural Fiber Reinforced Hybrid Polymer Composites |
|
| TTSME25227 |
Comparative and Experimental Investigation for Reducing Cutting Tool Wear Rate by Cryogenic Technique |
|
| TTSME25228 |
Some Experimental Investigation on Die Steel in Electric Discharge Machining with Various Parameters and Electrode |
|
| TTSME25229 |
Effect and Experimental Investigation of Boron Carbide in Tensile and Wear Characteristic of Aluminium Composite |
|
| TTSME25230 |
An Experimental Investigation and Surface Roughness Prediction of D2 with Ball Mill Tooling using DRO Milling Process |
|
| TTSME25231 |
Experimental Investigation and Fabrication of Removal of Iron and Manganese In Ground Water |
|
| TTSME25232 |
Experimental Study on Thermal Ratcheting Behavior of Ferritice Heat Resistant Pipe Elements at Very High Temperatures Application |
|
| TTSME25234 |
FEA and Experimental Investigation and Thermal Properties of the Ceramic Coating on Aluminium Piston by Plasma Spray Technique |
|
| TTSME25235 |
FEA Analysis and Experimental Evaluation of Piston with Plasma Spray Coating |
|
| TTSME25236 |
FEA Analysis on Combustion Characteristics in Porous Medium Injector of Ultra Micro Combustor with Hydrogen Fuel (In the Case of Fibrous Porous Media) |
|
| TTSME25237 |
Experimental Investigation on Aluminium Metal Matrix Composite in EDM with Various Parameters (AL+SIC+ZN) |
|
| TTSME25238 |
Experimental Investigation in TIG Welding Parameter to Increase The Tensile Strength, Surface Finish, in HAZ using Various Destructive Test and FEA |
|
| TTSME25239 |
Experimental Investigation of the Properties and Wear Resistance of the TI-N Plasma Spray Coatings for Tool Steel |
|
| TTSME25240 |
Investigation and Effect of Atmospheric Pressure Plasma on Soot and NOX Emissions |
|
| TTSME25241 |
FEA Numerical and Experimental Investigation of Ceramic Coating on Engine Valve by Plasma Spray Technique |
|
| TTSME25242 |
Experimental Investigation of Glass Fibre Epoxy Reinforced with Coconut and Coir Fibre |
|
| TTSME25243 |
Geometrical Evaluation and Surface Roughness in Drilling Al 6082 –B4C & Flyash Metal Matrix Composites using DOE Principle |
|
| TTSME25244 |
Geometrical Evaluation and Surface Roughness in Drilling Al 2024 -SI3N4 Metal Matrix Composites using DOE Principle |
|
| TTSME25245 |
Experiment Investigation to Increase the Mechanical Characterization of Aluminium with Silicon Carbide Composite |
|
| TTSME25246 |
Numerical Study on Combustion Characteristics of Rich- Premixed Gas Opposed by High Temperature Air using Elementary Reaction |
|
| TTSME25247 |
Numerical Analysis and Simulation of DPF Regeneration Process |
|
| TTSME25248 |
Optimization and Mechanical Property Analysis of Friction Drilling On Aluminium and Alloy Steel by using Tungsten Carbide Drill Bit |
|
| TTSME25249 |
Performance Analysis and Experimental Investigation of Brake Pad using Aluminium –Silicon Carbide |
|
| TTSME25250 |
Numerical Study on Interaction between Flame and Wall of Propane Air Premixed Flame |
|
| TTSME25251 |
Machinability Evaluation and Optimization of Carbon Fiber Reinforced Plastic by using CNC Turning |
|
| TTSME25252 |
Performance Investigation & Comparison of Different Phase Change Material in Heat Exchanger |
|
| TTSME25253 |
Performance and Emission Characteristics of Diesel Engine Blended with Eucalyptus Methanol Groundnut Oil with KOH |
|
| TTSME25254 |
Optimization and Mechanical Property Analysis of Friction Drilling On Aluminium and Alloy Steel by using Tungsten Carbide Drill Bit |
|
| TTSME25255 |
Numerical Study on the Combustion Characteristics in Ultra – Micro Combustor with Porous Wall Considering Surface Reaction |
|
| TTSME25256 |
Numerical Analysis on Combustion Behaviour of Fuel Spray Injected into High Temperature Air |
|
| TTSME25257 |
Investigation of Functional Improvement and Mechanical Evaluation of Fatigue Crack Healing by Surface Activated Pre Coating Method |
|
| TTSME25258 |
Investigation and Fabrication of Atmospheric Air Pollution Removal for Domestic and Industrial Usage |
|
| TTSME25260 |
Study on Tar Decomposition Characteristics During High Temperature Steam Gasification of Plastic Wastes |
|
| TTSME25261 |
The Tribological Property Comparison of IBAD CNX and DLC Coating |
|
| TTSME25262 |
Study on Combustion Characteristics of Pulverized Coal by Air Mixed with Hydrogen |
|
| TTSME25263 |
Study on Quantitative Evaluation of Pipe Wall Thinning using Frequency Characteristics of Microwave Method |
|
| TTSME25264 |
Investigation of Change of Ash Compositions in Cokes during Combustion Process |
|
| TTSME25265 |
Performance Analysis of Renewable Energy Thermo Electric Refrigeration System |
|
| TTSME25266 |
Estimation of Circularity, Cylindricity and Surface Roughness in Drilling on Forged Plate of Al 6063- ZRO2 & Flyash Metal Matrix Composite |
|
| TTSME25267 |
Study on Effects of Flue Gas Circulation on NOX Emission
Coal Combustion |
|
| TTSME25268 |
Study on Characteristics and Scattering Behavior of Molecular Beam |
|
| TTSME25269 |
Thermal Stresses Due to Electrical Discharge Machining on D3 Steel |
|
| TTSME25270 |
Performance, Combustion and Emission Characteristics of Urea-SCR in C.I. Engine Fuelled with Diesel – Pine Oil –Eucalyptus – KOH Blends with Multi- Layered Ceramic Coated Piston |
|
| TTSME25271 |
Performance, Combustion and Emission Characteristics of Pine Oil – Eucalyptus – KOH - and its Diesel Blends in a DI Diesel Engine using Ceramic Coated
Piston |
|
| TTSME25272 |
Geometrical Evaluation and Surface Roughness in Drilling Al 6061 – AL2O3&SIC Metal Matrix Composites using DOE Principle |
|
| TTSME25273 |
Geometrical Evaluation and Surface Roughness in Drilling Al 60161 – AL2O3&ZRO2 Metal Matrix Composites using DOE Principle |
|
| TTSME25274 |
Geometrical Evaluation and Surface Roughness in Drilling Al 7075 –ALN& SIC Metal Matrix Composites using DOE Principle |
|
| TTSME25275 |
Estimation of Circularity, Cylindricity and Surface Roughness in Drilling on Forged Plate of Al 5052-B4C& Flyash Metal Matrix Composite |
|
| TTSME25276 |
Study on Ash Deposition on a Heat Transfer Tube and its Control in a Waste Incinerator |
|
| TTSME25277 |
Experimental Analysis and Geometrical Effect on En24 in CNC Drilling with Coated Drill Bit |
|
| TTSME25278 |
Experimental Investigation in Arc Welding Parameter to Reduce the Residual Stress Analysis for Avoid Cold Cracks |
|
| TTSME25279 |
Experimental Analysis and machining characterisation al metal matrix with alumina oxide al2o3 |
|
| TTSME25280 |
Elliptical delamination in composite laminates: an experimental investigation |
|
| TTSME25281 |
An investigate the mechanical characterisation of al 7029 zirconium oxide & graphite metal matrix composite |
|
| TTSME25282 |
Application of coir fibres as concrete composites for disaster prone structures |
|
| TTSME25283 |
Biaxial testing of fibre-reinforced composite laminates |
|
| TTSME25284 |
Study of Durability of glass fiber reinforced plastic bars |
|
| TTSME25285 |
To Identify the Effect of moisture and aging on adhesive strength |
|
| TTSME25286 |
To Identify the Effect of strain rate on the tensile failure of glass-fibre braided tubes |
|
| TTSME25287 |
Evaluation of machining behaviours of aluminium metal matrix |
|
| TTSME25288 |
Experiment for bending Analysis of 3-phase composite plate in ship structure |
|
| TTSME25289 |
Experiment investigation to increase the mechanical characterization of aluminum |
|
| TTSME25290 |
Experimental Analysis and machining characterisation al 356 metal matrix with fly ash and alumina oxide |
|
| TTSME25291 |
Experimental Analysis and machining characterisation of al 6063 metal matrix with sic & fly ash |
|
| TTSME25292 |
Experimental Analysis and mechanical characterisation of 2014 alloy metal matrix with alumina oxide & graphite |
|
| TTSME25293 |
Experimental Analysis and mechanical characterisation of al 7071 alloy metal matrix with alumina oxide & graphite |
|
| TTSME25294 |
Experimental Analysis and mechanical characterisation of al6061 alloy metal matrix with boron carbide & graphite |
|
| TTSME25295 |
Experimental Analysis and mechanical characterisation of al alloy metal matrix with alumina oxide & graphite |
|
| TTSME25296 |
Experimental Analysis of de-lamination in drilling for aircraft structure |
|
| TTSME25297 |
Experimental investigation of mechanical properties for aluminium metal matrix composite (al+sic+zn) |
|
| TTSME25298 |
Fatigue behaviour study on repaired aramid fiber epoxy composites |
|
| TTSME25299 |
To investigatethe Fracture toughness of through-thickness reinforced composites |
|
| TTSME25300 |
Mechanical behaviour Analysis of brake pads al matrix and sic - fly ash reinforced metal matrix composite by using crucible casting |
|
| TTSME25301 |
Mechanical behaviour of glass epoxy composites at liquid nitrogen temperature |
|
| TTSME25302 |
Mechanical behaviour of bagasse fiber epoxy composites at liquid nitrogen temperature |
|
| TTSME25303 |
Mechanical characteristics evaluation of aluminum –cu&al2o metal matrix |
|
| TTSME25304 |
Mechanical characterisation of al metal matrix for automobile disc brake |
|
| TTSME25305 |
Strengthening of reinforced concrete beam using composites |
|
| TTSME25306 |
Mechanical evaluation and correlation of glass fiber and fiber reinforcement wit aluminum alloy (gfraa) to enhance strength |
|
| TTSME25307 |
Experimental and finite element Analysis of bonded, riveted, and hybrid joints in glass fiber – reinforced epoxy composite laminates for aircraft structure. |
|
| TTSME25308 |
Finite element Analysis and experimental validation of a composite leaf spring for an automotive vehicle |
|
| TTSME25309 |
An investigational study fibre orientation in glass fibre reinforced thermoplastic composites |
|
| TTSME25310 |
Impact Analysis and experimental study of stitched and un- stitched fibre glass - epoxy laminate to improve aircraft structure strength |
|
| TTSME25311 |
Mechanical properties of banana fibre reinforced composites - comparison and experimental investigation of glass fibre and natural fibre reinforced composites |
|
| TTSME25312 |
Woven glass epoxy laminated composite plate experimental evaluation and buckling Analysis |
|
| TTSME25313 |
Fiber composite fatigue and fracture under combined inter laminar stresses |
|
| TTSME25314 |
Fracture toughness of reinforced through-thickness composites |
|
| TTSME25315 |
Mechanical performance of recycled GFRP waste materials modified polyester polymer mortars |
|
| TTSME25316 |
Fabrication methods and properties of a nickel-carbon-fibre composite for large adaptive mirrors |
|
| TTSME25317 |
Surface fracture Analysis of glass fiber reinforced epoxy composites treated with various coupling agents |
|
| TTSME25318 |
A thermal conductivity of a structural glass/fiber epoxy composite depends on fiber orientation |
|
| TTSME25319 |
Interlaminar shear strength and flexural strength of glass and carbon composite laminates experimentally characterized under repeated curing |
FOR ANY UPDATES VISIT: WWW.TRIPLETECHSOFT.ORG